Home > Technical > Forward Facing lock and fold Rear Seats for a Defender 90 |
|
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2641 |
if they are genuine defender rear seats.. they are a lot of work to install; you have to cut the arches to properly do it...
check page 16 / 17 of this thread.. http://www.defender2.net/forum/topic15681-240.html Click image to enlarge |
||
28th Nov 2015 8:18am |
|
Ryderoo Member Since: 28 Aug 2015 Location: South Oxfordshire Posts: 1666 |
Insurance company would probably need to see a certificate of conformity, to show they have been professionally installed and tested to a standard. Cheers Simon
I can explain it to you, but I can't understand it for you 1990 110 TD5 county, my first Land Rover - gone 2012 Discovery 4 XS SDV6 - gone 2014 Discovery 4 XS SDV6 - gone 2015 Evoque SD4 dynamic - Wife’s - gone 2015 Urban Truck 90 XS Santorini Black Hard Top - Reluctantly gone 2020 Discovery 5 Eiger Grey 3.0 SE - gone March 24 2021 Defender S D250 Santorini Black 110 HT - gone March 24 2023 Evoque P300e SE wife’s current vehicle |
||
28th Nov 2015 8:35am |
|
Fozzauk Member Since: 05 Feb 2014 Location: Derbyshire Posts: 268 |
I replaced the whole rear tub on my 90 to fit these seats. Hardest part was finding the rear tub though
|
||
28th Nov 2015 8:58am |
|
Dinkyninja Member Since: 19 Aug 2015 Location: Stirling Posts: 6 |
Thanks guys. Its not official land rover seats so no need to do any adjustments to tub just bolt in place
ive just emailed department of transport to see what sort of inspection i would need afterwards but the insurance have been quite good saying that if get seats on v5 after inspection it should only increase premium by £85. hopefully will get them fitted next weekend |
||
28th Nov 2015 5:24pm |
|
capnjapseye Member Since: 21 Feb 2015 Location: Cornwall Posts: 223 |
Any more news on your planned fitting of these seats? I'm considering the same mod in my 2010 hard top. I might even just fit one, to the near side rear. Have you gone for the Exmoor Trim lock & fold?
Cheers |
||
3rd Dec 2015 6:40pm |
|
Dinkyninja Member Since: 19 Aug 2015 Location: Stirling Posts: 6 |
Heard back from Department of Transport and they basically say as long as the vehicle is safe it is fine however they advise using forward facing seats with three point inertia seatbelt and preferably having these fitted by a trained mechanic however this is not compulsory. they also advised having the seatbelt inspected (best way is probably at the next MOT)
As long as the load area can still be used it is still classed as a commercial vehicle so shouldn't be an increase in tax (if using fold up seats no problems with this) TBH it seems a lot less hassle than I had firs thought. As i have the third party forward facing seats rather than the actual Land Rover Defender ones it means no cutting away of body just bolt straight in and seatbelt kit bolts in. Just need to get back in touch with DVLA now to see how I would go about changing the V5 to say 4 seater to ensure paperwork all in order for insurance company If anyone is wanting the guidelines from Department of Transport for converting a van to carry rear passengers PM me as i don't know how to upload attachments onto the forum |
||
4th Dec 2015 11:59am |
|
Barney12 Member Since: 09 Jun 2015 Location: South West Posts: 744 |
A friend of mine converted his Disco 4 Commercial to a 4 seater. To ensure his Insurance Co were happy he sent it for a new MOT test. Considering the low cost of the test its probably not a bad idea regardless.
|
||
4th Dec 2015 1:11pm |
|
capnjapseye Member Since: 21 Feb 2015 Location: Cornwall Posts: 223 |
I'd be interested to know which manufacturer's seats you are using? 2015 90 Hard Top
1998 90 300Tdi - chuffed to have another one 2013 Freelander 2 - for posher trips to the shop 1996 300 Tdi 90 Hard Top - sold 19th June 2020 - miss it, loved it 2016 90 Hard Top - demolished Nov 2019 by young driver 3.5 times over the drug limit 2010 90 Hard Top - now sold Ex mil 90 - now sold |
||
4th Dec 2015 4:40pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis