DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 Nanocom

Page 1 of 1

Print this entire topic ·

Tank

Member Since: 25 Jul 2014
Location: Fife
Posts: 431

TD5 Nanocom

Bit the bullet and bought one

Great piece of kit and easy to use and set up.

My MAF is not reading 60 at idle so if definitely working with the replacement

Where can I get a list of error codes for the TD5 ? I had some spurious ones about AC and AC clutch or something but I dont have AC ??

Also is there anywhere I can get a list of what the settings on a good TD5 should be ?

Cheers

Tank

19th Nov 2015 10:08pm

grumpy old git

Member Since: 16 Nov 2013
Location: United Kingdom
Posts: 153

These are taken from the D2BC.co.uk site, they're for a Disco2 but as the Td5 is essentially the same they should be a good guide:

"MAF(air flow) = 55-60 at idle growing with revs up to 600 or above at 3000+rpm

AAP(ambient pressure) = real ambient pressure on barometer in kPa, around 100 must drop up to 2 units to 3000+rpm, more decreasing of that value related to the acceleration should indicate that the air beyond the filter is less than required.

AAT(ambient temp) -only Eu3/15-16P engines = real ambient temp on thermometer

MAP(manifold absoolute prssure) = with AAP at idle growing to 230 at full load

IAT(inlet air temp) = AAT + 10 to 30 depending on outside temp, engine coolant temp and boost(measured with coolant gauge at middle)...also it can be much higher if non-cooled EGR is still fitted

COOLANT TEMP = 70 - 115 gauge stays at the midddle, the gauge will go to red zone only at 120 and the electric cooling(aircon) fan kicks in at 110 and stops at 105

FUEL TEMP = around 10 less than coolant temp

THROTTLE
ACCEL. WAY 1 - about 0.3V with the pedal released, about 4.7V with pedal to the maximum position
ACCEL. WAY 2 - about 4.7V with the pedal released, about 0.3V with pedal to the maximum position
ACCEL. WAY 3 – this track must have values very near to the second track.(only 15P-16P engines)
ACCEL. SUPPLY – this value must stay between 4.9 a 5.1

IDLE SPEED = 750rpm"

Hope this helps.

19th Nov 2015 10:45pm

Tank

Member Since: 25 Jul 2014
Location: Fife
Posts: 431

Thanks Grumpy

Appreciate

19th Nov 2015 11:23pm

roel

Member Since: 08 Aug 2009
Location: Lelystad
Posts: 2039

I have the same error codes Aircon and autogearbox.

So if you don't have it, it's not broken.

Roel

1984 90 2.5 na Diesel - RR V8 (1994-2001)
1997 Camel Trophy Discovery 300TDI (2001-2009)
2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts.
2003 90 Td5 (2009-now)

20th Nov 2015 9:46am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum