DEFENDER2.NET - View topic - rear door a long way off fitting :(

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > rear door a long way off fitting :(

Page 1 of 1

Print this entire topic ·

Welkman

Member Since: 02 Nov 2014
Location: Essex colchester
Posts: 329

rear door a long way off fitting :(

Hi,

I have a nice rear door from a Puma to fit to my 110 (TD5) on trying to assemble today with new hinges I have found it hits in the top right hand corner of the door frame. There is a large gap towards the hinges at the top of the door which goes to nothing by the time the door reacher the other end of the frame.

The striker also does not engage which makes me think that the bodywork is really badly aligned. Any tricks to get this all square? I am pulling my hair out having had the door resprayed now.

Thanks

James

27th Oct 2015 4:17pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

The problem is that they are hand made, so they hold the door in the hole and drill the holes for the bolts to match the car. You could elongate the holes slightly as it should not take much or try and pull at wider gap at the bottom to lift the door slightly as there should be some adjustment. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

27th Oct 2015 4:24pm

CDN38

Member Since: 14 Nov 2014
Location: Courtenay, BC
Posts: 729

Are you new hinges Genuine or aftermarket?

I fitted a rear door a couple months ago for a friend, the aftermarket hinges were off by 1/4 inch!! The door would not fit with those hinges in place. Had to use the old set temporarily, and get Genuine replacements.

27th Oct 2015 4:28pm

Welkman

Member Since: 02 Nov 2014
Location: Essex colchester
Posts: 329

they are not genuine but the old door hinges are mega loose which makes me think they were wound right out to give enough play to fit. I tried to order genuine hinges but they turned up in a blue bag !

27th Oct 2015 4:35pm

Welkman

Member Since: 02 Nov 2014
Location: Essex colchester
Posts: 329

I might bore out the holes on the hinges with the pillar drill to see if that gives enough adjustment whilst waiting for replacement hinges.

27th Oct 2015 4:36pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum