DEFENDER2.NET - View topic - Identify this connector (KC Daylighter)

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Identify this connector (KC Daylighter)

Page 1 of 1

Print this entire topic ·

stooby do

Member Since: 14 Mar 2015
Location: St. Helens
Posts: 69

Identify this connector (KC Daylighter)

Can anyone tell me what type of connector this is? It is what is fitted to KC Daylighter spotlamps. I have bought a 2nd hand pair from ebay and I don't want to have to buy a KC wiring harness when I have the cable, switches, relays etc to make my own. Don't really want to cut the connectors off either and use spades/bullets.

Click image to enlarge

14th Oct 2015 12:45pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17448

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Two pole Econoseal I think. See http://www.autoelectricsupplies.co.uk/product/40

14th Oct 2015 1:11pm

stooby do

Member Since: 14 Mar 2015
Location: St. Helens
Posts: 69

I should have looked harder, it's a Deutsch DT04-2P. ( It was stamped on the side)

14th Oct 2015 1:23pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20447

If they are 130w I'd not be using an .econoseal connector personally. (Not sure it is either but if it is I looks like it's male.

130w divided by 14.2v running engine voltage = 9.1A draw each.
IIRC Econoseals are supposed to be 8A max current draw.

If they are 100w though they would be just under but personally I'd go for connectors of a higher rating.
Myself I have pre insulated spade terminals taped with a quality self amalgamating lectrical tape. Never let water in or caused me an issue in years now.
It also gives you the best current flow and less voltage drop by keeping the wire and connectors large.
I think I run 2.5mm or 3mm thinwall cable up to mine for maximum current flow.

14th Oct 2015 3:17pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17448

Deutsch DT042P-CE02 are rated to 13A continuous per pin.

If you need them, they can be sourced from Farnell.

14th Oct 2015 3:29pm

stooby do

Member Since: 14 Mar 2015
Location: St. Helens
Posts: 69

Thanks for the replies guys, polevolt also sell the connectors.

14th Oct 2015 4:00pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum