↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Defender Puma blowing brake light fuse!!!!
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Wildbill



Member Since: 14 Jul 2015
Location: Aberdeenshire
Posts: 11

United Kingdom 2011 Defender 110 Puma 2.4 USW Orkney Grey
Defender Puma blowing brake light fuse!!!!
Hi, my 2011 puma keeps blowing the fuse to the brake lights and clutch switch, I have unplugged the brake switch and put a new fuse in and the clutch switch works as it should so I think I have narrowed it down to the brake lights. Lamps are fine so seems to be in the loom any suggestions would be much appreciated. Sorry new to the forum!!!!
Cheers Bill
Post #453707 9th Sep 2015 7:01pm
View user's profile Send private message View poster's gallery Reply with quote
Alien



Member Since: 18 Jan 2015
Location: Bacchus Marsh
Posts: 230

Australia 
Welcome aboard Bill.
On our side of the world we have lot of issues with brake/tail light wiring in trailer plugs.
Often is broken wires inside the plug shorting out.

Try unplugging all 3 brake lights and see if it still does it.
It will isolate if it is loom or not this way. Cheers,
Kyle.
Post #453827 10th Sep 2015 6:14am
View user's profile Send private message View poster's gallery Reply with quote
mk1collector



Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

England 2004 Defender 110 Td5 CSW Bonatti Grey
Unplug the towing socket under the drivers side rear wheel arch and see if it still happens. The back of the socket can get full of water and rot away and the front can get full of mud if you go off road. Ray
My build thread
http://www.defender2.net/forum/topic17615.html
Post #453869 10th Sep 2015 9:55am
View user's profile Send private message View poster's gallery Reply with quote
Wildbill



Member Since: 14 Jul 2015
Location: Aberdeenshire
Posts: 11

United Kingdom 2011 Defender 110 Puma 2.4 USW Orkney Grey
Thank you both very much for you help!!! Where I had fitted the socket in the hole in the crossmember the wire had chaffed on the rectangular hole. So have now taped it up and wrapped it in an old bike inner tube like a grommet and spaced it away from the chassis a little bit. I now have the novel experience of people knowing when I'm going to stop!!!! Thanks guys!!!!
Post #454077 11th Sep 2015 8:13am
View user's profile Send private message View poster's gallery Reply with quote
Alien



Member Since: 18 Jan 2015
Location: Bacchus Marsh
Posts: 230

Australia 
Good pick up, it can be frustrating chasing chaffed wiring.
Nothing worse than studying the mirror when you slow up knowing the car behind may not be paying attention and relying on a red glow. Cheers,
Kyle.
Post #454306 11th Sep 2015 11:42pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums