 | Home > For Sale & Wanted > [For Sale] Seats - Vectra for Defender fitment |
 
|
|
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6628   
|
Time for a clearout...
First up, a pair of seats which were in the soft top 90 until I fitted XS heated seats. These are from a Mk1 Vectra (possibly GSi), and have adapter plates on the outer runner to pick up the Defender mounting holes. The inner runner requires two new 8mm holes drilling through the seat box to fit (fit captives would be my recommendation!) The seat bases do not remove as you'd expect. The plastic trims on the front are slightly loose, a few minutes with a glue gun or similar would sort. The driver's side seat is missing the lower seat belt mount cover plate - available on eBay for about £6. A few rust spots on the headrest posts, and surface rust on the adapter plates. Few marks which would clean out. No rips, tears or burns. Good comfy seats, great for a project or to replace a pair of tired standard seats. £20 the pair, collected from South Warwickshire/North Oxfordshire. Yes, just twenty pounds!  Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge 1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
20th May 2015 8:47pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
