 | Home > Maintenance & Modifications > Rear load mats for HT's |
 
|
|
|
| ibexman Member Since: 13 Dec 2008 Location: Essex Posts: 2947  
|
There is a LR rubber mat that goes over the floor and wheel arches with sticky pads on the back
 |
||
12th Feb 2015 2:02pm |
|
| need4speed Member Since: 23 Nov 2012 Location: Kilmarnock Posts: 746 |
If its a 90 you have lots of options. If 110 like me then not many options.
|
||
|
12th Feb 2015 3:00pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20512
|
I'd just need the rear bed section not the arches as they are CP.
I have 6x tie downs in there too, I really like the SW mat but I'm just wondering if it'd fit correctky with the cut outs each side. Shame there isn't a SW & HT type. |
||
|
12th Feb 2015 3:34pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769  
|
If you buy a genuine new station wagon mat doesn't it come uncut for the seats?
|
||
|
12th Feb 2015 4:37pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
Stable matting worked a treat in my 90 and it's heavy enough to kill a bit of noise
Plus a lot cheaper than something with a LR logo |
||
|
12th Feb 2015 5:46pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20512
|
This is the SW mat:
As you can see there are the cut outs there but my 90 HT doesn't have those seats. I have a thinish ribbed mat at the moment, it's not bad but it's not genuine and it traps dirt in the grooves. Biggest issue is that it's torn slightly in the middle each end looking a bit tatty. I've messaged Dan but yet to hear back yet. |
||
|
12th Feb 2015 6:02pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
That mat has had the sections cut out for the seat brackets but I thought they came with the cutouts still intact for the purchaser to remove. I may be wrong though.
Ray |
||
|
12th Feb 2015 6:09pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20512
|
Makes sense, will report back when I hear from Dan.
|
||
|
12th Feb 2015 6:35pm |
|
| josefk Member Since: 09 Jun 2014 Location: lincolnshire Posts: 113 
|
Hi Steve, I bought one of these recently ish (not from duckworths but i presume they are totally standard) and it came with the cut-outs already cut out. Cheers. Joe
|
||
|
12th Feb 2015 6:48pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20512
|
I see, do you have a photo at all?
 |
||
|
12th Feb 2015 7:02pm |
|
| Romadog Member Since: 07 Jul 2011 Location: Powys Posts: 1749 |
This is what you need
http://www.lrisolutions.co.uk/index.php/ne...-logo.html |
||
|
12th Feb 2015 7:04pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20512
|
That wouldn't work for me, having the side facing seats I've got.
I'd only want the mat for the bottom not the aches. Last edited by custom90 on 12th Feb 2015 8:33pm. Edited 1 time in total |
||
|
12th Feb 2015 7:12pm |
|
| SS90 Member Since: 16 Nov 2013 Location: Uk Posts: 372
|
Cheaper on Ebay.  |
||
|
12th Feb 2015 7:21pm |
|
| GUM97 Member Since: 05 Feb 2012 Location: Cheshire Posts: 3555 
|
Steve- I've just fitted one today into a Hard Top. It comes with the seat sections marked, but not cut out!
An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948" |
||
|
12th Feb 2015 8:01pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
