↓ Advertise on Defender2 ↓

Home > In Car Electronics > Work Lamp Remote Switch?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
SS90



Member Since: 16 Nov 2013
Location: Uk
Posts: 372
United Kingdom 
Work Lamp Remote Switch?
Is it possible to rig up a work lamp that can be controlled remotely by something like a key fob switch as well as a std switch?
Post #394113 30th Jan 2015 5:43pm
View user's profile Send private message View poster's gallery Reply with quote
theorangebandit



Member Since: 03 Jun 2013
Location: Stowmarket
Posts: 862
Bolt on bits do a remote switch it has a load of functions like disco flashing and strobe but also solid beam too
Post #394121 30th Jan 2015 5:54pm
View user's profile Send private message View poster's gallery Reply with quote
SS90



Member Since: 16 Nov 2013
Location: Uk
Posts: 372
United Kingdom 
Thanks, tried looking but do they have a website?
Post #394128 30th Jan 2015 6:09pm
View user's profile Send private message View poster's gallery Reply with quote
Rosco



Member Since: 03 Dec 2010
Location: Burntwood
Posts: 1835
United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Montalcino Red
Only an flea bay shop as far as I've ever found

http://stores.ebay.co.uk/Bolt-On-Bits-01274-688-388 2007 - Stornoway Grey 90 XS SW - Gone
2002 - Black Discovery II - Gone
2014 - Montalcino Red 110 XS SW
Post #394277 30th Jan 2015 11:50pm
View user's profile Send private message View poster's gallery Reply with quote
mrd1990



Member Since: 16 Aug 2012
Location: Wales
Posts: 600
Wales 2000 Defender 110 Td5 CSW Epsom Green
My £14 after market alarm has a remote start function, I've wired this up to the work lamp relay so the start up button turns the work lamp on instead. Works a treat and the standby energy consumption doesn't even register on my watts up. I also wired it up so somebody sets my alarm off, the 18w LED work lamp flashes instead of the indicators, this draws much more attention Twisted Evil

These tons of cheap chinese controllers on ebay and amazon.. just search for 12v wireless switch, but remember they don't support high current, even LED lamps are too high - you need a relay for the lamp and have the receiver to control the relay instead Thumbs Up
Post #394388 31st Jan 2015 12:34pm
View user's profile Send private message View poster's gallery Reply with quote
K9F



Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610
United Kingdom 2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey
A few options....

This one has a 10 amp rated output and looks to be best suited for your needs......

http://www.amazon.co.uk/Daytime-Running-Re...mote+relay

Lower output.....

http://www.miniinthebox.com/12v-2-channel-...wgod1YIAzA

http://www.amazon.co.uk/Dpower-Wireless-Co...mote+relay If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!
Post #394410 31st Jan 2015 1:54pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5864
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
Something like this?
http://www.ebay.co.uk/itm/12V-4CH-200M-Wir...43d46d2e68 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #394435 31st Jan 2015 3:40pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums