Home > Maintenance & Modifications > Exposed Cabling |
|
|
munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 |
cant be high level brake light or window heater as they run into side of door half way up
could be for worklight if fitted , but what ever it is , yes should go behind the rear quarter light trim |
||
11th Jan 2015 11:42am |
|
Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2751 |
its probably the hose that carries the water for the rear washer. just tuck it behind the trim yeah.
be careful not to break it, i damaged it on my old 90 and next time i used the rear was wipe it all squirted over the dogs in the back Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
11th Jan 2015 11:44am |
|
CatherineF Member Since: 22 Nov 2014 Location: Wiltshire Posts: 762 |
Hhhhmmm, No rear work light fitted or been fitted (as far as I can tell).
Will go and have a closer look in a bit. 2015 Audi Q3 Quattro S Line Plus 184 TDI Stronic 2010 90 SMC Over Land Nero Edition - Santorini Black Metallic (Now Departed) |
||
11th Jan 2015 11:49am |
|
Dave-H Member Since: 08 Feb 2011 Location: Surrey Posts: 1507 |
Yes, It's the black plastic hose for rear washer [mine is the same] along with a black cable on mine, terminating who knows where?
HT's don't have window trim, so it just runs up the side of the door frame ... worry not Guns and Landrovers .... anything else is irrelevant. |
||
11th Jan 2015 1:45pm |
|
CatherineF Member Since: 22 Nov 2014 Location: Wiltshire Posts: 762 |
What's it held on with as ours has obviously come away? 2015 Audi Q3 Quattro S Line Plus 184 TDI Stronic
2010 90 SMC Over Land Nero Edition - Santorini Black Metallic (Now Departed) |
||
11th Jan 2015 1:47pm |
|
Dave-H Member Since: 08 Feb 2011 Location: Surrey Posts: 1507 |
Self adhesive pads .. mine came away a long time ago ... just run a line of adhesive sealant along it and stick it in place with tape until it dries Guns and Landrovers .... anything else is irrelevant.
|
||
11th Jan 2015 1:59pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis