DEFENDER2.NET - View topic - Rear Lights not working

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Rear Lights not working

Page 1 of 1

Print this entire topic ·

Tom DCab

Member Since: 13 Jun 2013
Location: West Sussex
Posts: 33

Rear Lights not working

Hello All,
I just tried to fit a LED rear number plate light. I used the original connector that the old number plate light was wired in to, behind the light cluster.
The light did not work, so I reversed the positions of the 2 cables, and it then worked briefly, but with no rear taillights working. The brake lights are not working either.
I have checked the fuses and 2 of the 10A fuses seem to have blown, so I have replaced these and checked all of the other fuses which seem to be OK.
I have noticed that the fog light carling switch is now illuminated all of the time, whether pressed or not.

Rear lights still not working (they are also LED and have worked with no problems for over a year)

I am a bit lost! Could this be a faulty relay?
Any advice greatly received
Thanks.
Tom

10th Jan 2015 7:02pm

Fifth Horseman

Member Since: 08 Mar 2011
Location: Lanarkshire
Posts: 322

2011 Defender 110 Puma 2.4 XS CSW Santorini Black

Check the earths, also check for frayed wires as something has caused the fuses to blow.
There are a couple of threads about this.

11th Jan 2015 9:10am

Tom DCab

Member Since: 13 Jun 2013
Location: West Sussex
Posts: 33

Hi, thanks for replying.
I just fitted the old numberplate light back again and all ok now.
The old numberplate body has a metal base plate that attached to the plinth. The bolts go through the metal and secure to the bodywork. I am not an electrician but I am guessing this metal on metal contact through the light fitting is necessary to make the lights work properly.
The Led numberplate light does not have a metal base plate, so I am not sure how it is ever going to work...
Tom

11th Jan 2015 10:00am

Fifth Horseman

Member Since: 08 Mar 2011
Location: Lanarkshire
Posts: 322

It seems that your rear lights are earthing through the numberplate light plinth which is not how it should be. The earth circuit should be via the black wire to a separate earth connection (on the transfer box).
Check the earth connection on the transfer box that is referred to in this post.

Earlier land rovers had the earth as a separate connection to the body panel behind the lights.

11th Jan 2015 1:11pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

Could try disconnecting tow electrics as they can short things out if they aren't well looked after

11th Jan 2015 3:26pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20325

Yes, the towing electrics can cause all sorts of oddities to occur.

11th Jan 2015 3:55pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum