Home > My Defender > 2001 Defender TD5 X Tech edition (new springs fitted) |
|
|
ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731 |
Lovely truck
Now fit a decent alarm and a tracker Tell someone you love them today because life is short. But shout it at them in German because life is also terrifying and confusing... |
||
8th Oct 2014 4:29pm |
|
Defender-Stu Member Since: 14 Jun 2012 Location: South West England Posts: 1320 |
Welcome to the mad house , nice to see the older X-Techs popping there heads out , any more planned for her?
Stu |
||
8th Oct 2014 4:35pm |
|
GUM97 Member Since: 05 Feb 2012 Location: Cheshire Posts: 3555 |
Very nice! An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948" |
||
8th Oct 2014 4:59pm |
|
silky16v Member Since: 11 Aug 2014 Location: Cumbria Posts: 99 |
Already has them fitted, if you look carefully you can see the stickers on every window Last edited by silky16v on 8th Oct 2014 7:29pm. Edited 1 time in total |
||
8th Oct 2014 7:27pm |
|
silky16v Member Since: 11 Aug 2014 Location: Cumbria Posts: 99 |
Was going to fit some anti-roll bars but not decided yet fitting the Bilsteins has made a huge difference already Maybe a remap and straight through middle section exhaust, then discovery transfer box gearing if I remap it |
||
8th Oct 2014 7:28pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3786 |
Looking good. Can you expain what sort of difference the Bilsteins have made (ie, how are they different from standard), as I may fit B6 Bilsteins myself at some stage. Did you change any suspension bushes?
Pickles. |
||
8th Oct 2014 8:45pm |
|
Defender-Stu Member Since: 14 Jun 2012 Location: South West England Posts: 1320 |
I had a td5 d2 and done the cat and mid sections and wow what a great roaring noise nearly had to do the rear as well lol |
||
8th Oct 2014 9:13pm |
|
silky16v Member Since: 11 Aug 2014 Location: Cumbria Posts: 99 |
they have tightened up the ride, less body roll now, slightly harsher over bumpy roads but feels fine on normal tarmac feels alot more confident in the corners, all the bushes are good order and where replaced with LR originals before i purchased it The originals i took off where shot on the front, the rears had just started to have play in them car has covered 72,000 miles since new so where due to be changed anyhow |
||
9th Oct 2014 11:31am |
|
silky16v Member Since: 11 Aug 2014 Location: Cumbria Posts: 99 |
Some updated Pictures, fitted new clutch and flywheel recently, alloy radiator, new oil pump bolt while engine was out (peace of mind now) fitted new gaskets all round and new bushes in the transfer box selector
trying so decide on which set of road springs to fit now, much confusion and a nightmare getting prices of certain suppliers anyhow some fresh pictures after a wash and wax still to fit my Gwyn Lewis front mudflap bracket and outrigger mud shields http://www.ebay.co.uk/itm/Land-Rover-Defen...2a47265e7d and my Boomslang headlamp wiring loom Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
3rd Dec 2014 12:02pm |
|
MarkyMark Member Since: 28 Oct 2014 Location: New Forest Hampshire Posts: 62 |
Looking really nice.
What make is your roof rack ? Cheers Mark |
||
3rd Dec 2014 12:47pm |
|
silky16v Member Since: 11 Aug 2014 Location: Cumbria Posts: 99 |
Patriot Rack was left on the car when i bought it, thought about selling it but it has come in handy many times already
|
||
3rd Dec 2014 1:07pm |
|
Ellisboy Member Since: 13 Oct 2013 Location: Deep South Posts: 539 |
Very nice
|
||
3rd Dec 2014 4:24pm |
|
90dv Member Since: 29 Jun 2011 Location: Cumbria Posts: 36 |
Nice looking Land Rover you have there! If you need any help with stuff give me a shout! I live at Shap!
Goes for anyone that needs help! Dom |
||
3rd Dec 2014 4:35pm |
|
silky16v Member Since: 11 Aug 2014 Location: Cumbria Posts: 99 |
superb thanks, so far been ok done the engine and gearbox out to replace clutch and flywheel, need to change my springs when they arrive and also fault find my AFM do you have Nanocom? Last edited by silky16v on 4th Dec 2014 12:28pm. Edited 1 time in total |
||
3rd Dec 2014 4:53pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis