 | Home > Wheels & Tyres > Pictures please of 18" Twisted alloys with tyres |
 
|
|
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678  
|
If it's already been done please let me know where to look, if not, please post up pictures of your Defender fitted with 18" ET10 Twisted alloys and let me know which tyres you have fitted - Thank you
These will be replacing my 5 x Genuine Sawtooths fitted with MTR's, four of which have travelled 2400 miles and the fifth has not been on the road .... |
||
28th Nov 2014 9:46am |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2640 
|
check my thread regarding my truck, do you want specific pics or just of them on a truck? i think i have a photo of one next to a boost alloy also
|
||
|
28th Nov 2014 12:38pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Thank you, I'll go take a look.
Looking at the Twisted site they seem to offer their trucks with 285/65/18 or 265/65/18 BFG AT's and I wondered what the two sizes looked like fitted and what other tyre choices there were ? |
||
|
28th Nov 2014 12:40pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Yes, that's a nice look Likeomg
What size tyres are yours and is your truck lowered ? (I'm presuming your wheels are ET10 ?) |
||
|
28th Nov 2014 12:42pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2640
|
 Click image to enlarge Click image to enlarge Click image to enlarge for quick reference, they say use 285's on 110's and 265 on the 90's i went with 285 the truck as you say is lowered about 1" to get it to sit level Last edited by Likeomg on 28th Nov 2014 12:48pm. Edited 1 time in total |
||
|
28th Nov 2014 12:47pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Awesome, thank you
Standard suspension ? |
||
|
28th Nov 2014 12:48pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2640
|
on alive's springs which lower about 1" and make it sit level
|
||
|
28th Nov 2014 1:32pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Are the wheel nuts specific to these alloys ?
|
||
|
28th Nov 2014 1:36pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2640
|
yeah, and a locking wheel nut set isn't cheap either
make sure they send you 5 locking nuts if you buy 5 wheels, there a little cheeky and only send 3 nuts for the 5th. Last edited by Likeomg on 28th Nov 2014 1:48pm. Edited 1 time in total |
||
|
28th Nov 2014 1:47pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Thank you.
I can't see the standard wheelnuts on the Twisted site ??? |
||
|
28th Nov 2014 1:48pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2640
|
Sorry for the slow reply... Being in the middle of a ocean isn't ideal.
Just call them up and they will sort you out. |
||
|
29th Nov 2014 9:40pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
