DEFENDER2.NET - View topic - Propshaft UJ phasing

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Land Rover Customer Relations > Propshaft UJ phasing

Page 1 of 1

Print this entire topic ·

67_6Cyl

Member Since: 10 Feb 2010
Location: France
Posts: 97

Propshaft UJ phasing

Hi Mike@LR

Could you please find some technical information for me?

I'm trying to track down the source of vibration in my 2007 110SW. It is almost certainly from the prop-shafts, as the gearbox was recently removed from the vehicle to change the clutch, and I suspect that at least the rear prop-shaft was split in two and then reassembled (to make life easier for the mechanic taking the gearbox out).

Now, the workshop manual for the 2.4 defender states that both prop-shafts are "phased" i.e. the UJ's out of alignment, however doesn't give any idea as to how far out of alignment they should be. I would like to check that everything has been correctly reassembled by the authorised repairer that changed the clutch before I go and create a stink.......

Could you please find out how they should be phased for me?

Thanks

Jon

(thread about the problem here)

23rd Jul 2014 8:10am

CRC@LandRover
Verified Account

Member Since: 25 Mar 2013
Location: Coventry
Posts: 383

Hi Jon,

Please PM me the following bits of information so that I can pass your enquiry onto the relevant department:
Full Name
Email
Telephone Number
VIN

Many Thanks

Mike

23rd Jul 2014 11:17am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum