DEFENDER2.NET - View topic - downpipe to 300tdi

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > downpipe to 300tdi

Page 1 of 1

Print this entire topic ·

lacrits68

Member Since: 23 Apr 2014
Location: Umeå
Posts: 9

downpipe to 300tdi

hello!

Im replacing shot turbo and thougt was to chage to an decat pipe as well. I did try to get old out, and ended to cut it out with a grinder.

question: Im suppose to get decat pipe in place witout removing anything? rave says to remove only exhaust support bracket...!

Vehicle is 130 300tdi.

cheers

Jan

25th Jul 2014 12:51pm

cornish rattler

Member Since: 31 Aug 2013
Location: Manchester
Posts: 642

1988 Defender 90 200 Tdi CSW Bronze Green

Jack up the car so the N/S/F wheel is just off the ground you may need to jack up the axle between the diff and the O/S/F wheel to allow the N/S/F wheel to hang but please use axle stands under the chassis aswell then turn the front pipe whilst feeding it through between the front axle and bumper then once the front part of the front pipe is fully through it should be in the right place to fix to the manifold and exhaust then remove axle stands and lower the car down.

another way is to just remove the gearbox X member but depending on con'd cant always undo the bolts without snapping but if you can it is a safer way but more fiddly, hope this helps

Graham

1988 Defender 90 county 200tdi ( Beast )

Paul Walker 1973-2013
( I Almost Had You )

4th Aug 2014 6:18pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum