DEFENDER2.NET - View topic - Can you change the side window glass?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Can you change the side window glass?

Page 1 of 1

Print this entire topic ·

Killer90
Site Sponsor

Member Since: 09 Oct 2011
Location: Hertfordshire
Posts: 6478

2016 Defender 110 Puma 2.2 XS DCPU Fuji White

Can you change the side window glass?

I see land rover sell a part for the 1 piece sliding glass on its own- part number: cpb000220, can you just change the glass i take it? if so how hard is it to do cheers

Its going into the side windows on a puma 110 csw xs so are the later type windows bonded in

CSK Automotive
www.cskautomotive.co.uk
Like us on Facebook - www.facebook.com/csklr
Follow us on Instagram - @cskautomotive

1st Dec 2012 1:55pm

Tiger

Member Since: 06 Jul 2012
Location: Wales
Posts: 2265

You need to take the whole window out first.

You can the 'split' the frame, countersunk screws from memory and slide the glass out.

Mine was riveted so drilled the rivets out to release the window, if it's bonded in the f@&k knows how you do it.

1st Dec 2012 3:32pm

Killer90
Site Sponsor

Member Since: 09 Oct 2011
Location: Hertfordshire
Posts: 6478

cheers mate i can see the counter sunk screws two on each side aint there

pulling it is a pain still not out

CSK Automotive
www.cskautomotive.co.uk
Like us on Facebook - www.facebook.com/csklr
Follow us on Instagram - @cskautomotive

1st Dec 2012 4:50pm

Jim_Bean

Member Since: 10 May 2011
Location: Staffordshire / Shropshire border
Posts: 613

2013 Defender 110 Puma 2.2 XS CSW Santorini Black

Did you manage to replace the sliding window glass on your Puma? I would like to do the same on my 2013 110 with the bonded windows.

23rd Jun 2014 11:05am

Killer90
Site Sponsor

Member Since: 09 Oct 2011
Location: Hertfordshire
Posts: 6478

Sure did fella, you do have to remove the windows which is a bit of a job. I use cheese wire now and a long bladed knife to cut the bond when i remove to fit panoramics

Doing one today funnily enough

CSK Automotive
www.cskautomotive.co.uk
Like us on Facebook - www.facebook.com/csklr
Follow us on Instagram - @cskautomotive

23rd Jun 2014 11:28am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum