DEFENDER2.NET - View topic - servo hissing on switch off

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > servo hissing on switch off

Page 1 of 1

Print this entire topic ·

g-mack

Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967

servo hissing on switch off

whilst investigating a few problems today, i discovered my servo hisses when i turn engine off.
this i think is good news! ???? as my brakes have been OK but not great if applied hard. so im thinking the servo is letting in air (cracks common so i believe). Am i right in my diagnosis? should i order a new servo? My 109 thread

my youtube channel

19th May 2014 4:13pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

I have seen them crack on the outer metal skin , sure they crack round where the master cylinder bolts to servo or was it on the back of servo been a while since ive seen one do it , sure it was front

Last edited by munch90 on 19th May 2014 4:20pm. Edited 1 time in total

19th May 2014 4:19pm

gilarion

Member Since: 05 Dec 2013
Location: Wales
Posts: 5112

2007 Defender 90 Other CSW Trident Green

More than likely it is a cracked house, of course it could also be your diaphragm. Early servos you can get a repair kit for later ones sadly not so. Bend and squeeze the rubber hoses along their length to see if there any micro cracks

19th May 2014 4:20pm

g-mack

Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967

just to answer my own thread, i changed the servo and th brakes are now awesome!! result

My 109 thread

my youtube channel

3rd Jun 2014 9:41pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum