Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
Benzini wrote:
So I take it I should fabricate something to go off of the large bolts to the left of the clutch pedal.
Also, I can't see anywhere obvious where the cable is supposed to go through the firewall?
Click image to enlarge
as your looking at the picture what is the silver thing to the far left up in the top corner inline with the pedal box bolts , looks like a cable end bit ( the outer cable end which normally has a thread and nut to hold it ) where the cable would come out , not original but looks like someone has fitted it after
looks like the inner cable and handle are missing
check under the bonnet down beside clutch master cylinder box and see what's coming out the bulkhead
30th Apr 2014 7:25pm
Benzini
Member Since: 26 Apr 2014
Location: Sleaford
Posts: 10
you were bang on Munch
At first thought it was some sort of bolt, turns out it was the end bit of an old bonnet release.
Sorted!
Click image to enlarge
6th May 2014 4:49pm
munch90
Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
6th May 2014 4:49pm
