 | Home > Technical > TD5 PRV Hose |
 
|
|
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856  
|
I'm seating for some stainless braided hose for my crankcase breather. Needs to have 25mm inside diameter. AN -18 should be the correct size but everyone seems not to list it.
Google fails me because of the "-" in the size AN -18 so it excludes the size. A search on AN18 fails to show up what I need. Any ideas? www.td5.org |
||
23rd Feb 2014 6:05pm |
|
| Porny Site Sponsor Member Since: 31 Aug 2009 Location: Sutton Coldfield - West Midlands Posts: 809 
|
Phil,
Give www.jlsmotorsport.com a shout. Great place and will make hoses up to suit. Ian IRB The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers. www.IRBdevelopments.com www.facebook.com/irbdevelopments www.integrated316.com www.facebook.com/integrated316 |
||
|
24th Feb 2014 10:48am |
|
| bob neville Member Since: 30 Apr 2009 Location: Marbella Posts: 3248  
|
Any use ?
http://www.hoseworld.com/acatalog/STAINLES..._HOSE.html 25mm ID at the bottom of the list. Bob 2015 Jaguar XE240 R Sport - goes like ....... !! 2013 Defender 90 CSW - sold 2009 Defender 110 Double Cab - sold 2001 TD5 90 CSW - offroad project - sold to a forum member 2011 Porsche Boxster - for the sunny days ! |
||
|
24th Feb 2014 1:34pm |
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856
|
Hi Bob, I had looked at that site before and not seen any, in fact the bottom half of the page didn't load from your link the first time I opened it. Must be something about the way my browser is trying to display the page.
Thanks www.td5.org |
||
|
24th Feb 2014 1:56pm |
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856
|
They sure do make some nice looking things! www.td5.org |
||
|
24th Feb 2014 1:57pm |
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856
|
by the time you add VAT and then delivery the Hoseworld prices seem very high!! www.td5.org
|
||
|
24th Feb 2014 2:02pm |
|
| Porny Site Sponsor Member Since: 31 Aug 2009 Location: Sutton Coldfield - West Midlands Posts: 809
|
James Lister and Sons is only a run down the M6 for you... IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers. www.IRBdevelopments.com www.facebook.com/irbdevelopments www.integrated316.com www.facebook.com/integrated316 |
||
|
24th Feb 2014 2:57pm |
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856
|
I'm going to have to contact them and see what they can do. Their catalogue does the same as everybody else's and skips AN-18 going straight from AN-16 to AN-20 www.td5.org
|
||
|
24th Feb 2014 3:34pm |
|
| Steve B Member Since: 22 May 2009 Location: Warwickshire Posts: 586  
|
Hi Phil,
I used 1" smooth bore pond hose 
I got it from Blooms garden centre, you must have passed it on the way to me. It was only temporary until I found something better but I never really did. It definitely needs some heat protection over the exhaust side but apart from that it works just fine. Cheap too. There is a picture on the for sale advert. Steve  |
||
|
25th Feb 2014 8:45pm |
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856
|
I did think about that Steve, I will likely get some to get the lengths right before committing to an expensive mistake! Your right, I did pass Blooms on the way to yours! www.td5.org
|
||
|
25th Feb 2014 9:35pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
