DEFENDER2.NET - View topic - Rear door lock problems

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Rear door lock problems

Page 1 of 1

Print this entire topic ·

Harald

Member Since: 30 May 2012
Location: Flanders Fields
Posts: 81

2010 Defender 90 Puma 2.4 Fire LE Vesuvius Orange

Rear door lock problems

When I close my LR defender Puma (2010) with the remote controle everything closes.
But when I open it with the remote controle I can't open the backdoor.
Inside on the lock you see the little black .... goes up when closing, but comes only half down when opening.

Anyone has the same problem, and maybe knows a solution to fix this?

15th Jan 2014 5:54pm

Blacktt600

Member Since: 30 Nov 2013
Location: Leeds
Posts: 125

2008 Defender 110 Puma 2.4 XS CSW Cairns Blue

As of today I have the same problem, it opens with the key though.Will have a look this weekend when I get chance.

15th Jan 2014 6:05pm

Romadog

Member Since: 07 Jul 2011
Location: Powys
Posts: 1749

This is a common problem apparently. I think it comes from too much end float on the white plastic pivot between the metal rod from the solenoid and the lock itself. I thought I'd fixed this by putting a bend in the rod from the lock. Immediately it was better, but it seemed to play up with me again at the weekend.

15th Jan 2014 6:12pm

Blacktt600

Member Since: 30 Nov 2013
Location: Leeds
Posts: 125

Just sprayed wd40 in the slot where the black lever is and it's now working fine.😀

15th Jan 2014 6:31pm

EWS

Member Since: 29 Nov 2011
Location: Bristol
Posts: 156

Romadog wrote:
This is a common problem apparently. I think it comes from too much end float on the white plastic pivot between the metal rod from the solenoid and the lock itself. I thought I'd fixed this by putting a bend in the rod from the lock. Immediately it was better, but it seemed to play up with me again at the weekend.

I had similar problem, found the white plastic jobbie was working its way out of the hole, so screwed in a chunky self tapping screw through the center of white jobbie to spread the retaining lugs. two years and no further problems with it.

15th Jan 2014 6:39pm

Harald

Member Since: 30 May 2012
Location: Flanders Fields
Posts: 81

THNX, this weekend I will have a closer look at it and see if I can find (and fix) anything.

I'll keep you informed, Harald

16th Jan 2014 7:50am

Harald

Member Since: 30 May 2012
Location: Flanders Fields
Posts: 81

A picture I found on the WWW:

Click image to enlarge

16th Jan 2014 7:51am

Harald

Member Since: 30 May 2012
Location: Flanders Fields
Posts: 81

Thorougly cleaning and afterwards some Innotec Hogh-tef oil did the trick.

Thanks to all,

Harald

17th Feb 2014 1:31pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum