↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > carbon fibre body panels
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
badwookie



Member Since: 07 Feb 2010
Location: kuwait
Posts: 25
Kuwait 2010 Defender 90 Puma 2.4 XS CSW Zermatt Silver
carbon fibre body panels
It would be a revelation...if one could find...out there somewhere...carbon fibre parts...body panels perhaps...or tubular side-steps...
Post #25298 27th Feb 2010 2:16pm
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 799
 
Re: carbon fibre body panels
badwookie wrote:
It would be a revelation...if one could find...out there somewhere...carbon fibre parts...body panels perhaps...or tubular side-steps...


I can have any panel made in carbon fibre.... but it's not cheap.

I've been looking at having Puma bonnets made, but not sure I'd sell enough to make it worthwhile - it's not cheap to have the moulds made.


Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #25374 28th Feb 2010 10:55am
View user's profile Send private message View poster's gallery Reply with quote
badwookie



Member Since: 07 Feb 2010
Location: kuwait
Posts: 25
Kuwait 2010 Defender 90 Puma 2.4 XS CSW Zermatt Silver
glad to bump into you...how much would a bonnet cost?

can you manufacture side-steps as well ?

engine parts?

wheels ?
Post #25413 28th Feb 2010 4:11pm
View user's profile Send private message View poster's gallery Reply with quote
badwookie



Member Since: 07 Feb 2010
Location: kuwait
Posts: 25
Kuwait 2010 Defender 90 Puma 2.4 XS CSW Zermatt Silver
willing to order any part if build quality is acceptable...especially if you can manufacture a puma grill and light surrounds
Post #25414 28th Feb 2010 4:15pm
View user's profile Send private message View poster's gallery Reply with quote
Paul55



Member Since: 03 Feb 2009
Location: Somewhere in my head!
Posts: 510
England 2008 Defender 90 Puma 2.4 XS CSW Santorini Black
badwookie wrote:
willing to order any part if build quality is acceptable...especially if you can manufacture a puma grill and light surrounds


Know your talking, that would be nice, carbon fibre grill and light surrounds Mr. Green Cogito ergo sum
Post #25432 28th Feb 2010 6:25pm
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 799
 
badwookie wrote:
willing to order any part if build quality is acceptable...especially if you can manufacture a puma grill and light surrounds


Quality of parts is 110%

I can have any thing made in carbon fibre or GRP - but if only low order quantites then parts will be expensive.

For example - a carbon fibre puma bonnet (all reinforced as per steel original) works out to about £1000 if I only order one or two at a time.

Grill and light surrounds not a problem.... Standard or SVX style? Can do both, but SVX will be more. If SVX I can also supply all the lights and wiring looms required.


Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #25436 28th Feb 2010 7:19pm
View user's profile Send private message View poster's gallery Reply with quote
badwookie



Member Since: 07 Feb 2010
Location: kuwait
Posts: 25
Kuwait 2010 Defender 90 Puma 2.4 XS CSW Zermatt Silver
i guess next step is to contact you on the phone...
Post #25468 28th Feb 2010 10:15pm
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 799
 
badwookie wrote:
i guess next step is to contact you on the phone...


Or email or pm..

Email address in on my website - www.IRBdevelopments.com


Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #25472 28th Feb 2010 10:31pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums