↓ Advertise on Defender2 ↓

Home > In Car Electronics > Bulkhead subs & boxes
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20443
United Kingdom 
Bulkhead subs & boxes
Anyone got any thoughts on fitting shallow mount subs and boxes each side of the bulkhead? I know it's tight and behind the seats and very shallow but the internal volume could be made up by going outwards.
A Kenwood shallow mount 12" only requires 10cm depth (add a touch for MDF thickness) and an internal box volume of 22 litres which is around around 0.790CU FT. Which is box dimensions of approx D6" x W20" x H10"
Not even sure if that room is available but just an idea I am thinking about lately, some ideas similar on google images but probably not quite as tight. No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #284921 24th Nov 2013 8:42pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums