EWS
Member Since: 29 Nov 2011
Location: Bristol
Posts: 156
 
|
Hi all.
Have a long running issue with seating, do not have lots of funds available, so having to look at reclaimed seat/s.
Drivers seat no problem, ( standard Exmoor Trim seat is fitted and I also have a Modular seat available ) . But a matched set of seats would be a bonus.
The query is, could a set of Range Rover P38 seats be fitted to a 06 Defender, with little modification, the rails look similar, not so important for the drivers position, more so for the passenger seat. Access to the battery would seem to more difficult, but this could be resolved by fitting a Anderson connector/leads , for the flat battery incident .
So any one have any thoughts on this ???
|
30th Sep 2013 11:43pm |
|
RILEY
Member Since: 01 Feb 2013
Location: United Kingdom
Posts: 35
|
P38 seats might be a little high
i have fitted audi tt seats to mine not to bad (modded the seat box to suit)
will be removing bulkhead partially for more recline but thats just my choice probably ok without
all that said wow they are really comfy (and heated  ) one life, sell it
|
|
4th Oct 2013 7:28pm |
|
