Home > Puma (Tdci) > Opinion about Front Runner Drawers |
|
|
MD5 Member Since: 02 May 2011 Location: Italy Posts: 143 |
Hi all,
I'm interested in adding a drawing system to my 110. I see that the Front Runner brand made a drawing system specifically made for the Puma. Front Runner Drawers: http://www.frontrunner.co.za/front-runner-...-2-4.html# I would like to know your opinion about. Any forum user own it ? Thanking in advance for any answer. |
||
28th Sep 2013 5:04pm |
|
MD5 Member Since: 02 May 2011 Location: Italy Posts: 143 |
Thanks for your feedback, really appreciated!
The top of the drawer is strong enough to load the fridge and a couple of 20 liter water can ? Has a tendency to sag or flex ? Any need to drill the chassis to fix the drawing frame or it use the existing hole of the foldable seat ? |
||
29th Sep 2013 5:15pm |
|
Regard Member Since: 08 Dec 2011 Location: RSA Posts: 251 |
Hi MD5
Yes, it is plenty strong enough. You can drill new holes to secure but I will never do this. I fastened it by using the 2 "large" holes on each side where the two jump seats came out (the holes you accessed from below the wheel arch). I drilled two holes through the top board of the drawer on each side corresponding with the existing holes as discussed above and used large washers and M8 bolts to fasten the deck to the car. |
||
29th Sep 2013 9:54pm |
|
MD5 Member Since: 02 May 2011 Location: Italy Posts: 143 |
Hello Regard,
Thanks again for the information, I located a national reseller and definitely buy one Greetings. |
||
30th Sep 2013 3:50am |
|
Marius Member Since: 21 Dec 2010 Location: South Africa Posts: 231 |
Hey where did you get that rear bumper??
|
||
30th Sep 2013 6:36am |
|
Porny Site Sponsor Member Since: 31 Aug 2009 Location: Sutton Coldfield - West Midlands Posts: 799 |
Another option is http://www.senseofadventure.biz/drawers
Will makes some excellent drawers, and will tailor to individual requirements. Ian IRB The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers. www.IRBdevelopments.com www.facebook.com/irbdevelopments www.integrated316.com www.facebook.com/integrated316 |
||
30th Sep 2013 9:46am |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis