DEFENDER2.NET - View topic - Fitting puma seats in 90

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Fitting puma seats in 90

Page 1 of 1

Print this entire topic ·

kalf

Member Since: 16 Jul 2013
Location: Kalmthout
Posts: 3

Fitting puma seats in 90

I recently bought a pair of puma forward facing rear seats and when looking for information about fitting them in my 90, I ended up here.
Thanks to this and this topic, I found most of the necessary information and part numbers. There is only one thing I can't seem to find and that's the dimensions for the wheel arch modification. I can do most of the fabrication myself (with help from some friends

), but without the dimensions that is rather difficult.
I could roughly guess them using the the interior trim, but having the correct dimensions would really help

.

The hight and width I can simply measure, so I only need the dimensions of the "lower part". I've put some red lines on a picture to show which dimensions I need.

If someone has these dimensions, that would help me a lot!

16th Jul 2013 5:32pm

Killer90
Site Sponsor

Member Since: 09 Oct 2011
Location: Hertfordshire
Posts: 6478

2016 Defender 110 Puma 2.2 XS DCPU Fuji White

You could take dimensions from a puma and make a smaller version of what i sell

I know get them made x10 pairs at a time, locally fabricated using the original cad image.

To save you the time i do keep them in stock, im down to my last set which will be used to show off at billing and hten sent to its new owner

but ill have more with in 1 week CSK Automotive
www.cskautomotive.co.uk
Like us on Facebook - www.facebook.com/csklr
Follow us on Instagram - @cskautomotive

16th Jul 2013 6:27pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6611

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

You'd better not sell my that set at Billing

1988 90 Td5 NAS soft top

2015 D90 XS SW

16th Jul 2013 7:49pm

kalf

Member Since: 16 Jul 2013
Location: Kalmthout
Posts: 3

Only the shipping cost for sending a pair of those over here would cost me more than it would making them myself

. I work at a rather big company that mainly does fabrication so I already found most of the sheet-metal I would need "just lying around" sort of speak

(and yes my boss knows it

).

Combining that with being able to do most of it myself, I don't really want to spend a couple 100 pounds getting some prefabricated ones

. Neither do I have a puma around (unless the shoes count, in that case I even have a pair) to take the dimensions from, otherwise I would have done that already

. And most people aren't that keen on stripping their interior for me just for some dimensions

.

At this side of the channel there aren't too many people who have fitted forward facing seats in the earlier Land Rovers, so I'm not finding much useful information here either.

16th Jul 2013 8:52pm

Killer90
Site Sponsor

Member Since: 09 Oct 2011
Location: Hertfordshire
Posts: 6478

Martin, there yours dont you worry

. Will be exdisplay and touched by every passer by

Kalf - i have a 90 xs puma down tommorow once its all stripped out ill get some photos over and measurements

CSK Automotive
www.cskautomotive.co.uk
Like us on Facebook - www.facebook.com/csklr
Follow us on Instagram - @cskautomotive

16th Jul 2013 9:10pm

kalf

Member Since: 16 Jul 2013
Location: Kalmthout
Posts: 3

Thanks man!

19th Jul 2013 11:57am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum