DEFENDER2.NET - View topic - transferbox bolt torque

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > transferbox bolt torque

Page 1 of 1

Print this entire topic ·

bunnyman

Member Since: 29 May 2013
Location: herts
Posts: 119

2009 Defender 90 Puma 2.4 HT Galway Green

transferbox bolt torque

Hi all
have oil leak on bottom gasket on my puma 09 defender transfer box, does anybody know the tourqe settings for the bolts and any other tips would be greatly appreciated .
many thanks bunny

25th Jun 2013 5:32pm

Apynala

Member Since: 17 Oct 2009
Location: Morroco
Posts: 88

2009 Defender 110 Puma 2.4 SW Chawton White

Hello,

Could you take a picture, are you sure that it doesn't come from the seal of the rear output shaft.

25th Jun 2013 9:02pm

bunnyman

Member Since: 29 May 2013
Location: herts
Posts: 119

Hi Apynala
just seem to get droplet of oil on lowest bolt have cleaned down but carnt see any oil running down from above can take picture tomorrow pitch black at the moment , cheers bunny

25th Jun 2013 9:15pm

kmac

Member Since: 07 Oct 2009
Location: Middlesex
Posts: 1309

2009 Defender 110 Puma 2.4 USW Santorini Black

Hi the drain bolt torque on transfer box is 50nm (filler bolt torque is 35nm)

25th Jun 2013 10:04pm

bunnyman

Member Since: 29 May 2013
Location: herts
Posts: 119

cheers kmac
the bolt torque i needed was the bolts on the lower case gasket for when i renew it saturday, didnt want to over tighten

25th Jun 2013 10:11pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum