Home > Puma (Tdci) > Gearbox is out and on the deck |
|
|
T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101 |
trouble is 700 ft lbs usually means wheel spin so the load is only momentary.
4wd, lockers in bouncing over obstacles will shock load all the drive train far more.. i've seen the video steve get it fixed, i'll sort you out with an auto next year that will hack it. |
||
26th May 2013 9:06am |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
What videos
Ok cheers tig up Steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
26th May 2013 9:18am |
|
T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101 |
climbing over the skips at the show recently?
anyways i guess the engine works ok if it chewing boxes up already |
||
26th May 2013 9:39am |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
Ahh lol well tbh if the gearbox had gone there I could have understood it but not cruel ing up the a1 at 60mph lol
Stevd 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
26th May 2013 10:09am |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
It's missing teeth on one of the gears proper answer will be out Monday
Steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
1st Jun 2013 7:40pm |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
Well I'm at ashcrofts now yes it's stripped 4-5 teeth no bearings have failed they have never seen anything like it
Luck the internals are the same as 2.4 apart from some bigger bearings 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
3rd Jun 2013 12:28pm |
|
diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6098 |
Lucky escape then.
Wonder if it was just a manufacturing defect on that gear? |
||
3rd Jun 2013 1:42pm |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
Lets hope so 2015 2.2 tdci hardtop xs
3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
3rd Jun 2013 2:17pm |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
well its back to gether lets hope she lasts just got to bleed the clutch and bolt props on
steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
5th Jun 2013 5:56pm |
|
big steve Member Since: 24 Dec 2009 Location: hertfordshire Posts: 2456 |
i took her up the road onigth seems all ok
the ATB seems as though its working steve 2015 2.2 tdci hardtop xs 3.2 conversion DONE 238bhp and 707nm torque and thats just the start ;-P hybrid turbo in build -done ready to fit ashcroft atb in transfer box 6 speed auto in build |
||
8th Jun 2013 6:10pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis