Home > Puma (Tdci) > Programing in a new fob |
|
|
Porny Site Sponsor Member Since: 31 Aug 2009 Location: Sutton Coldfield - West Midlands Posts: 809 |
Chris,
If you have the 10AS alarm ECU option enabled on your Nanocom Evo, then you should be able to do this without a problem. You will need your old key fob and the new one to hand, as the way the Nanocom works it will delete any pre programmed fobs. All you need to do activate the alarm fob learn process then one fob at a time, keep pressing one of the fob button until the indicators flash, or you get a beep from the horn. Do the same with the second fob and then end the learn process. Job done. Or, if you don't fancy doing yourself - and good independent specialist can do this for you, as can a main dealer. Ian IRB The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers. www.IRBdevelopments.com www.facebook.com/irbdevelopments www.integrated316.com www.facebook.com/integrated316 |
||
13th Jan 2013 2:17pm |
|
Dieselhead Member Since: 21 Oct 2012 Location: Pulborough. West Sussex Posts: 552 |
Thanks for the info Ian.
I will have a look when I get 5 mins All the best Chris 2008 XS 110 2.4 Utility. Tonga Green 1953 Series 1 for restoration 1983 Mini Mayfair 2004 VW T5 Camper 2008 Diahatsu Sirion. Thats hers Classic Bolens Garden Tractors |
||
16th Jan 2013 8:20pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis