DEFENDER2.NET - View topic - Spare Wheel Carrier / Original Door Plate Position

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Spare Wheel Carrier / Original Door Plate Position

Page 1 of 1

Print this entire topic ·

kwd112

Member Since: 07 Sep 2024
Location: South Wales
Posts: 5

Spare Wheel Carrier / Original Door Plate Position

Hi all,

Going to be fitting an swingaway spare wheel carrier this week.

As with most, this one requires me to use the same holes left behind after taking off the original spare wheel carrier door plate... However my door curerently does not have a plate or any holes.. Working with a blank canvas.

Can anyone tell me the exact position of the original wheel carrier or point me in the direction of an official drawing detailing the measurements?

Don't know if it was mounted in the same position on all variants but I've a 200TDI 90.

TIA

16th Sep 2024 7:06pm

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2277

1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey

You can see where to drill from the inside if you take the door card off.
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

17th Sep 2024 8:53am

kwd112

Member Since: 07 Sep 2024
Location: South Wales
Posts: 5

Up there for thinking, down there for dancing!

Will let you know how it goes.

Thanks!

17th Sep 2024 9:52pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum