DEFENDER2.NET - View topic - Front Window Wind Deflectors

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Front Window Wind Deflectors

Page 1 of 3

Print this entire topic ·

noworries4x4

Member Since: 24 Dec 2010
Location: Newton Abbot Devon
Posts: 1195

Front Window Wind Deflectors

Right then does anyone know where to get the "climair" style deflectors for a 57 Puma Defender as i got a set recently on the web but there is no way they are going to slip into the window edge on the new door, i guess the new ones stick on ?? If everything is under control you are not going fast enough.

Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle
Weekends 07MY L322 TDV8 Vogue SE
Series 1 80" 3ltr 6cyl with overdrive
No Worries 4X4

11th Jan 2011 8:55pm

RED-DOT

Member Since: 29 Jun 2009
Location: stirling
Posts: 2363

http://www.google.co.uk/aclk?sa=l&ai=C...4366-p.asp 2008 RS4 gone, 123d M Sport, and a Puma 90 XS..

11th Jan 2011 9:16pm

ken

Member Since: 18 Aug 2009
Location: Banging Birds with my bitches !!
Posts: 4328

Nope the new ones dont stick on

11th Jan 2011 9:19pm

The Boy

Member Since: 28 Aug 2008
Location: East Northants
Posts: 1459

2009 Defender 110 Puma 2.4 XS CSW Rimini Red

I had a set on the tdi and when I got my first puma I bought aset for that too but they unlike the tdi were a real

to fit, I ended up cracking/splitting both sides and i also scratched the paint work. On this 110 I have not bothered but I do miss them. I was thinking of the stick on ones but I am not sure how they would look.

11th Jan 2011 9:21pm

ken

Member Since: 18 Aug 2009
Location: Banging Birds with my bitches !!
Posts: 4328

dont fit them until the ambient temp is a bit higher

11th Jan 2011 9:25pm

noworries4x4

Member Since: 24 Dec 2010
Location: Newton Abbot Devon
Posts: 1195

ken wrote:
Nope the new ones dont stick on

Where do they go then ? between the black metal strip and the door or window seal and black metal strip ? as per the other mmber i gave up when i cracked the corner off one and guessed that i had been done on the net and got TD5 ones If everything is under control you are not going fast enough.

Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle
Weekends 07MY L322 TDV8 Vogue SE
Series 1 80" 3ltr 6cyl with overdrive
No Worries 4X4

11th Jan 2011 10:12pm

WarPig

Member Since: 04 Dec 2009
Location: Sheffield
Posts: 1748

1996 Defender 110 300 Tdi USW Bonatti Grey

Are these the ones?

http://www.johncraddockltd.co.uk/products/...ng_td4.php

http://www.climairuk.com/search.php?mode=search&page=1

12th Jan 2011 12:14am

Defender SVX

Member Since: 29 Jan 2009
Location: Co Durham
Posts: 730

2008 Defender 90 Puma 2.4 SVX Soft Top Santorini Black

noworries4x4 wrote:
ken wrote:
Nope the new ones dont stick on

Where do they go then ? between the black metal strip and the door or window seal and black metal strip ? as per the other mmber i gave up when i cracked the corner off one and guessed that i had been done on the net and got TD5 ones

I put them inside the channel beside the glass works and looks fine. Still a little fiddly to fit as said wait till ambient outside temp as you do have flex them quite a bit. Formerly mao99999
16 Focus RS Nitrous Blue.
11 FFRR TDV8 Vouge SE Black Black.
08 DEFENDER SVX SOFT TOP (SUPERB)
08 DEFENDER 110 DCPU Stornoway grey (Overland Exploration Unit)
05 Fiesta ST 150 Van
04 Jaguar XKR 4.2 Supercharged V8
02 DEFENDER 90 TD5 (next years soft top project)
95 DEFENDER 110 CSW 300 TDi Phoenix black
95 DEFENDER 90 HT Monti Carlo blue COUNTY 300 TDi
67 109" SERIES 2a TUNED 200 TDI
64 DAVID BROWN 990 rat look
55 86" SERIES 1

12th Jan 2011 7:04am

Grockle

Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266

2008 Defender 90 Puma 2.4 XS CSW Tonga Green

you have to remove the small black window guide first look, into the frame for a small cross head screw which holds this in place then remove from behind the window seal, then carefully 'twist' the the deflector into place. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.

12th Jan 2011 8:33am

noworries4x4

Member Since: 24 Dec 2010
Location: Newton Abbot Devon
Posts: 1195

Grockle wrote:
you have to remove the small black window guide first look, into the frame for a small cross head screw which holds this in place then remove from behind the window seal, then carefully 'twist' the the deflector into place.

Thanks for that ill have a look at the weekend when i am home ta If everything is under control you are not going fast enough.

Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle
Weekends 07MY L322 TDV8 Vogue SE
Series 1 80" 3ltr 6cyl with overdrive
No Worries 4X4

12th Jan 2011 8:19pm

fekete

Member Since: 24 Dec 2008
Location: Here on the other end of the computer
Posts: 3626

2007 Defender 90 Puma 2.4 HT Bonatti Grey

found these on Ebay if your still after some

http://cgi.ebay.co.uk/LAND-ROVER-DEFENDER-...711wt_1051 NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY

21st Jan 2011 9:33pm

pouf

Member Since: 05 Aug 2010
Location: Athens
Posts: 456

2009 Defender 110 Puma 2.4 SW Zermatt Silver

fekete wrote:
found these on Ebay if your still after some
http://cgi.ebay.co.uk/LAND-ROVER-DEFENDER-...711wt_1051

got the same, front and rear ! www.newfoundland.gr

21st Jan 2011 9:54pm

fekete

Member Since: 24 Dec 2008
Location: Here on the other end of the computer
Posts: 3626

Any good ? NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY

22nd Jan 2011 1:42am

pouf

Member Since: 05 Aug 2010
Location: Athens
Posts: 456

just got

, i haven't put them yet .(anyway look good!)

i am planing to do that in about 2 weeks with other works (spare wheel carrier, dog guard, side steps, rear ladder, qt protection ). i'll put photos www.newfoundland.gr

22nd Jan 2011 6:12pm

BigMike

Member Since: 13 Jul 2010
Location: Lancashire
Posts: 2253

I can't work out where these go at all. they cant go in the window channel, and there is no space on the other side?

the cross head screw near the top of the channel - how odes that relate to the black retainer? its miles away.

so on the pic below, where do they go?

Click image to enlarge

5th Feb 2011 2:05pm

Page 1 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum