DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > truckman top

Page 1 of 1

Print this entire topic ·

mro

Member Since: 21 Aug 2010
Location: north wales
Posts: 26

2012 Defender 110 Puma 2.2 XS DCPU Santorini Black

truckman top

Ive just fitted a truckman top to my doublecab,ive had to remove the alluminium strip attached to the rear of cab as the top would not clear,now im left with a gap of aprox 25mm on the forward panel bottom edge of the truckman top ,what is the best way of sealing to prevent water getting in,i know i wont stop all of the leaking but id like to prevent it as much as poss

28th May 2012 9:11pm

adafish

Member Since: 30 Mar 2009
Location: atherstone
Posts: 1387

1984 Defender 110 300 Tdi DCPU Stornoway Grey

it should slot into the metal " strip " at the back of cab...and have a foam seal.. Putting Dreams on Drives at JLR Solihull..

28th May 2012 9:16pm

ben_j85jty

Member Since: 03 Sep 2008
Location: Bicester, Oxfordshire
Posts: 491

2002 Defender 110 Td5 XS DCPU Bonatti Grey

Yep, I fitted mine over the strip.

I did have to trim the the metal a little for a good fit. 2002 Defender 110 DC

28th May 2012 9:24pm

mro

Member Since: 21 Aug 2010
Location: north wales
Posts: 26

yes just had another look the strip will have to be trimmed a bit to allow the top to sit properly thanks for the replys

28th May 2012 9:55pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum