 | Home > Puma (Tdci) > Removing arches |
 
|
|
|
| Landyash Member Since: 06 Feb 2011 Location: Nottinghamshire Posts: 287   
|
Really easy,if you look at the mushroom type clip ( under the archers )there is a bit in the middle you push out,don't worrie about them falling out just pick them up off the floor and push them back in when refitting
Cheers Ash |
||
21st Feb 2012 6:54pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987  
|
Cheers , no more sleepless nights whilst waiting now, all i need to do is sort out some plain arches
|
||
|
21st Feb 2012 7:00pm |
|
| fekete Member Since: 24 Dec 2008 Location: Here on the other end of the computer Posts: 3626 
|
Just use a nail and a hammer to tap the pins out of the mushroom type clip as they can be stiff
NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY |
||
|
21st Feb 2012 7:03pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
 A hammer on a new motor , oh no sleepless nights again |
||
|
21st Feb 2012 7:10pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101 
|
no worse than de valuing by removing the arches! |
||
|
21st Feb 2012 7:35pm |
|
| kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987
|
don't want colour coded arches, too much bling for a defender but want a colour coded roof
How will that devalue it |
||
|
21st Feb 2012 8:24pm |
|
| walfy Member Since: 29 Aug 2007 Location: Frome Posts: 2679 
|
Just take it offroad and brush into a few trees and the arches will remove themselves
If you keep the originals and wrap them up nicely, when you come to sell you then have the set that's fitted and a nice shiny new set of colour coded arches to fit. Job done 110 D250 SE HT
110 USW SOLD RRE HSE Dynamic Gone, wife killed it VOLVO XC60 R Dynamic with some toys Polaris RZR 900XP SOLD |
||
|
21st Feb 2012 8:28pm |
|
| cobs Member Since: 12 Jun 2008 Location: North Yorkshire Posts: 336 
|
It's worth buying some spares before refitting as you'll inevitably lose some of the plastic pins when pushing them out. the part no is :MWC 9918PMA
|
||
|
22nd Feb 2012 8:01am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
