 | Home > My Defender > Red 90 V8 CSW - a bit faded, but I like it |
 
|
|
|
| Hairy Dan Member Since: 25 Apr 2013 Location: NW Durham Posts: 1414   
|
My V8 steams like that in the wet also
  Cheers Ian
-------------------- 22MY Defender 110 D200 SE, Fuji White. Kielder 4x4 Safari Instagram @defender_v8 |
||
27th Dec 2019 5:01pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197 
|
Juicy? yes
I've used half a tank on a trial doing 6 miles To counter that, I've had 140miles out of a tank on a motorway run. 90 V8 CSW - 1988 |
||
|
29th Dec 2019 1:51pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
The rear has now been stripped and refitted with foam and carpet, along with a new rubber floor mat.
Overall a huge improvement and a much more civilised drive - I can actually enjoy the sound of the engine now.  Click image to enlarge 90 V8 CSW - 1988 |
||
|
22nd Apr 2020 8:28pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10742 
|
Good job done there and glad you can enjoy the sound of your engine even more
 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
22nd Apr 2020 8:32pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
After some time it's another update.....
From the exhaust thread, I now have a pair of 'twin port' manifolds on it connected to late Range Rover down pipes and Y piece into a TD5 exhaust. The comment has been made 'how do you make a diesel exhaust sound good?' - connect it to a V8.....
Click image to enlarge There was a bit of fettling to be done to get it to fit properly and there's still a hanger missing to finish it Click image to enlarge Click image to enlarge I then had a sudden alternator failure which meant my first recovery Click image to enlarge I'm sure it was because I'd found a 3.9 to rebuild Click image to enlarge Then there's the Bilsteins - kindly donated by DAZ100 they've finally been fitted, not just because the cheap sh*t BritPart dampers that had been fitted to pass the MoT in February had given up the ghost, but because I did want that 'planted' feeling that quality products give. Click image to enlarge Click image to enlarge So it's sounding better, riding better and just needs the carbs tickling to bring out the best in it - I can now sustain fifth gear on the motorway and I think a tweak from an expert will help. I'll be calling NovaTech in Slough tomorrow. 90 V8 CSW - 1988 |
||
|
17th Sep 2020 9:45pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
Well, struggling to find someone to tweak the carbs - Novatech's phones isn't working and they aren't answering emails.
Just been out for a play in the mud at Aldermaston and the oil pressure switch has failed - leaking through the middle of it and just pi**ing out. I've ordered two new ones ands will keep one as a spare with the fan belts. 90 V8 CSW - 1988 |
||
|
11th Oct 2020 2:40pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
In an effort to stem the seemingly endless drips of oil I re-seated the new pressure switch. What a mistake that was, on an alloy boss.
It appears that there had been a crack in the boss all the time, which had been a slow leak until I exerted my considerable spanner skills, and killed the thing completely. A new plate was stolen from the 3.9 which is currently being rebuilt and fitted. Click image to enlarge At the risk of the 'kiss of death' that seems to have stemed the tide of Castrol's finest. I can now park on the drive without having to put a drip tray underneath. That won't last long...... Other news is we're planning a trip to the Pyrenees next summer. If anyone has any useful info, maps etc for the smugglers trails I'd be most grateful if you could send it on. I'm also looking for another V8 front cover to go onto then new 3.9 build. 90 V8 CSW - 1988 |
||
|
4th Dec 2020 9:29pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10381
|
Good progress, hope the trip plan goes well. There’s a few on her who’ve been many times... put up a separate ‘help’ post in expedition section.
|
||
|
4th Dec 2020 9:43pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
I'm doing the research now - I'll have a big list of questions!! 90 V8 CSW - 1988
|
||
|
4th Dec 2020 10:08pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10381
|
It’s why we’re all here
|
||
|
4th Dec 2020 10:10pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
Definitely!!
I'm still looking for someone to tune the SUs on the V8 - NovaTech has closed down and they came highly recommended. The only other one I've had in the area is Tom Airey, but my perception is that he focuses on performance engines (race & rally cars) and charged accoerdingly. If anyone has any suggestions for carb experts in the Surrey/berkshire/hampshire area please let me know 90 V8 CSW - 1988 |
||
|
4th Dec 2020 10:21pm |
|
| Lodelaner Member Since: 04 Feb 2010 Location: Lambourn Posts: 631 
|
Could try challenger 4x4, safari engineering or Rovertune in Reading? JB
@Lodelaner Instagram Youtube greenlaning and other LR related content |
||
|
5th Dec 2020 4:25pm |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
Many thanks - I'll call round those 90 V8 CSW - 1988
|
||
|
15th Dec 2020 11:46am |
|
| Ranger 6 Member Since: 17 Jan 2019 Location: Yorkshireman trapped in a Surrey postcode Posts: 197
|
Having a bit of a January clear out - there's the whole collection of wheels and tyres in the for sale section.
Then, there's the latest purchase to come  90 V8 CSW - 1988 |
||
|
12th Jan 2021 2:41pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
