Member Since: 20 Mar 2018
Location: Buckinghamshire
Posts: 272
Fitted mine this weekend. Went with a 76mm 2ply silicone hose from ASH and then purchased a revotec outlet for the wing. See pictures below, very straightforward as it fits nicely under the steering column. It might be a squeeze if you have ABS however. To fit it at the wing I used the original casing, drilled a 76mm hole and just placed the revotec outlet in and secured it with some self tappers. I also fitted some gauze to the bottom of the outlet where the original pipe work goes, this will allow water to drain out and also prevent things from being sucked in. All in it cost £30.
There are definitely performance increases since fitting it and noise increases. Waiting for mine to be remapped now with all the bits added.
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlargeInstagram - @Land_Rover_Defender
26th Apr 2020 10:12pm
LandRoverAnorak
Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
27th Apr 2020 7:13am
