DEFENDER2.NET - View topic - 130 rear arches

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > 130 > 130 rear arches

Page 1 of 1

Print this entire topic ·

fatboyron

Member Since: 28 Jul 2018
Location: Aylesham Canterbury Kent
Posts: 116

130 rear arches

Just a quick question, I made a couple of threads about this.

Do I need a set of front arches from a 110 or was it the rear arches I would need?

And what size rivets should I use?

Many thanks
Ronald

24th Aug 2018 7:24pm

RoadForce

Member Since: 17 Jul 2014
Location: Holland
Posts: 335

2000 Defender 130 Td5 HCPU Coniston Green

I think opinions on this vary, but IIRC I have 110 fronts on mine, reversed, and attached using 14 mm rivets. I used a cutting disk on an angle grinder to cut them back a bit (using tape as a guide), then sanded for a smooth finish.

Click image to enlarge Defender 130 HCPU Td5 MY2000

26th Aug 2018 5:18pm

AndrewS

Member Since: 10 Apr 2007
Location: Hereford
Posts: 3708

2013 Defender 130 Puma 2.2 SW Rimini Red

I've done a few, use standard rears. They are not quite the correct shape however when you fit them if you warm them up with something like a space heater this will help. Use molegrips to hold the arch in place whilst fitting. I use 16mm rivets.
Take a look in my gallery's.

Click image to enlarge

Click image to enlarge 130's have feeling's as well you know

26th Aug 2018 8:07pm

Naf

Member Since: 07 Dec 2016
Location: Sandbox
Posts: 412

2000 Defender 130 Td5 HCPU Nato Green No Canopy

use a heat gun and be patient.

i used normal 110 rear arches and instead of rivets i used threaded nutserts

27th Aug 2018 1:36pm

fatboyron

Member Since: 28 Jul 2018
Location: Aylesham Canterbury Kent
Posts: 116

Thank you all for your replies.

I've ordered set of rears and rivets and will have a go at the weekend, I shall put some pictures up when I'm done.

Ronald

27th Aug 2018 8:02pm

fatboyron

Member Since: 28 Jul 2018
Location: Aylesham Canterbury Kent
Posts: 116

Click image to enlarge
Finally got around to fitting my rear arches. Got a nice picture today on the way to St Michael's Mount

28th Sep 2018 3:53pm

Naf

Member Since: 07 Dec 2016
Location: Sandbox
Posts: 412

Wider britpart arches

Click image to enlarge

Click image to enlarge
up front

28th Sep 2018 4:51pm

fatboyron

Member Since: 28 Jul 2018
Location: Aylesham Canterbury Kent
Posts: 116

Naf what size type do you have. I'm running on 235's

28th Sep 2018 5:15pm

Naf

Member Since: 07 Dec 2016
Location: Sandbox
Posts: 412

Wheels are 20x9 with an et10 am also runnin a 30mm spacer

Tires are 305/50r20 nitto grapplers

28th Sep 2018 5:41pm

saroshadil

Member Since: 29 Nov 2018
Location: Detroit, Michigan
Posts: 3

These are my favorite. Can you please post some more photos!

RoadForce wrote:
I think opinions on this vary, but IIRC I have 110 fronts on mine, reversed, and attached using 14 mm rivets. I used a cutting disk on an angle grinder to cut them back a bit (using tape as a guide), then sanded for a smooth finish.

Click image to enlarge

20th Mar 2019 9:29pm

RoadForce

Member Since: 17 Jul 2014
Location: Holland
Posts: 335

Thanks! I will try to (remember to) take some more and post them here. Defender 130 HCPU Td5 MY2000

21st Mar 2019 9:52am

RoadForce

Member Since: 17 Jul 2014
Location: Holland
Posts: 335

Here ya go!
Stock suspension and 285x75r16...

Click image to enlarge

Click image to enlarge Defender 130 HCPU Td5 MY2000

21st Mar 2019 6:36pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum