DEFENDER2.NET - View topic - Puma Central Locking not operating rear doors

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Puma Central Locking not operating rear doors

Page 1 of 1

Print this entire topic ·

x-isle

Member Since: 26 May 2011
Location: Midlands
Posts: 1327

2007 Defender 110 Puma 2.4 XS CSW Santorini Black

Puma Central Locking not operating rear doors

Hi all,

Just picked up my 2007 110 Puma and have noticed that the Central locking locks both front doors and the back door, but not the rear doors?

It's a bit weird why both doors are not working, has anyone got any pointers?

Many thanks in advance! Craig Rogers

2007 Puma 110 XS
2011 Evoque Coupe Dynamic Lux
www.craigrogers.photography

30th May 2011 3:32pm

spudfan

Member Since: 10 Sep 2007
Location: Co Donegal
Posts: 4742

one of my rear doors would not lock-it turned out to be a broken wire in the rubber sleeve where it bends between the door and the door pillar.Seems like yours are not connected up to the system. 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali
2008 110 2.4 tdci csw-Zulu
2011 110 2.4 tdci csw-Masai

30th May 2011 5:46pm

x-isle

Member Since: 26 May 2011
Location: Midlands
Posts: 1327

Thanks Spudfan,

I'll get a multimeter to the wires and check for voltage.

Does anyone know where the control unit for the central locking is? Under driver's seat? Craig Rogers

2007 Puma 110 XS
2011 Evoque Coupe Dynamic Lux
www.craigrogers.photography

31st May 2011 6:31am

Fifth Horseman

Member Since: 08 Mar 2011
Location: Lanarkshire
Posts: 330

2011 Defender 110 Puma 2.4 XS CSW Santorini Black

Door locking unit is part of the alarm system - the box is mounted on the bulkhead behind the fuse box (made difficult to get to for obvious reasons).
First thought is as spudfan says, a break in the sleeves between the door pillars and the doors. I had great fun with this when one of mine shorted out on locking the vehicle and blew the fuse for the CDL.
The cables from both rear doors come together in the box under the driver's seat, on connectors C2004/5

Click image to enlarge
Purple wire on pin 1 and orange wire on pin 3.
All the motor supplies come from the same pins on the CDL ECU so your problem is definitely a wiring fault.

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

31st May 2011 2:42pm

x-isle

Member Since: 26 May 2011
Location: Midlands
Posts: 1327

Huge thanks, saves a lot of time tracing cables back!!!!! Craig Rogers

2007 Puma 110 XS
2011 Evoque Coupe Dynamic Lux
www.craigrogers.photography

31st May 2011 2:47pm

x-isle

Member Since: 26 May 2011
Location: Midlands
Posts: 1327

Well after some multimeter action, the connector under the driver's seat had power, but both rear doors didn't.

It ended up being exactly as mentioned (and a common problem it seems). Both doors had broken cables within rubber flexi-pipes. Bit of solder later and all doors are now locking.

Once again, thanks for all your help!!!!

Craig Rogers

2007 Puma 110 XS
2011 Evoque Coupe Dynamic Lux
www.craigrogers.photography

31st May 2011 7:57pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum