DEFENDER2.NET - View topic - Lock-barrel-to-pushrod thingie: part number?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Lock-barrel-to-pushrod thingie: part number?

Page 1 of 1

Print this entire topic ·

RoadForce

Member Since: 17 Jul 2014
Location: Holland
Posts: 337

2000 Defender 130 Td5 HCPU Coniston Green

Lock-barrel-to-pushrod thingie: part number?

I recently replaced my lock barrels (part no MTC6505) and want to replace the "thingie" that connects the barrel to the pushrod, but I can't seem to find the part number! It's the part that the barrel's end fits into (kept in place by the sprung pin) and that takes the screw at the other end to connect it to the pushrod, know what I mean?

Your help is much appreciated!

Oh, and the Br#tpart barrels suck, it takes me a long time to put the key all the way in and get it back out again, the key seems to catch on every plate that's inside the barrel arrrgghhh!!! Will have to replace them. I knew the blue bag parts aren't top quality, but these are totally and utterly crap!

Edit: fixed typos Defender 130 HCPU Td5 MY2000

Last edited by RoadForce on 28th Dec 2017 8:35am. Edited 1 time in total

27th Dec 2017 8:57pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Lubricating them with graphite powder will solve the latter problem. I fitted new locks to mine with similar results but a little bit of graphite has transformed them. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

27th Dec 2017 10:10pm

RoadForce

Member Since: 17 Jul 2014
Location: Holland
Posts: 337

Really? Will give it a try for sure, I thought they were beyond repair!

Anyone any clue on the part number? So basically the part that MTC6505 slides into? Defender 130 HCPU Td5 MY2000

28th Dec 2017 8:37am

RoadForce

Member Since: 17 Jul 2014
Location: Holland
Posts: 337

LandRoverAnorak wrote:
Lubricating them with graphite powder will solve the latter problem. I fitted new locks to mine with similar results but a little bit of graphite has transformed them.

Thanks, some lubricant sorted it out!

Now all that's left is the part number. Anyone? Defender 130 HCPU Td5 MY2000

29th Dec 2017 7:15pm

MercianRover

Member Since: 07 Apr 2022
Location: Culworth
Posts: 141

1998 Defender 110 300 Tdi CSW Java Black

Hello,
the rear lock barrel on my 300TDi Defender is faulty and it's a single-sided key type whereas the doors and filler cap use the same double-sided key.

Will MTC6505 fit this variant of Defender?

7th Nov 2022 10:41am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum