Home > Puma (Tdci) > 2.2 2014 110 van Self-engaging diff lock |
|
|
Happyoldgit Member Since: 14 Sep 2007 Location: Norfolk Posts: 3471 |
Sounds like the linkage needs adjusting. Steve.
Owned numerous Land Rover vehicles of all shapes and sizes over the decades. Current Defender: A non tarts hand-bagged Puma 110 XS USW. [Insert something impressive here such as extensive list of previous Land Rovers or examples of your prestigeous and expensive items, trinkets, houses, bikes, vehicles etc] http://forums.lr4x4.com I used to be Miserable ...but now I'm ecstatic. |
||
4th Jan 2016 5:13pm |
|
Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 |
Thank you. Would that cause it to engage itself without any input from me?
|
||
4th Jan 2016 7:15pm |
|
ashtrans Site Sponsor Member Since: 08 Nov 2008 Location: Harpenden Posts: 257 |
I don't think there is anyway to adjust the throw on the TDCi's, the pivot is fixed Dave Dave |
||
4th Jan 2016 7:23pm |
|
RockJaw Member Since: 15 Oct 2013 Location: United States Posts: 317 |
Since it seems to happen at the same place, did you lock it while you were visiting?
Just thinking it might be some joker messing with the vehicle - strange? yes, but these things could happen. ****CENSORED**** |
||
5th Jan 2016 12:12pm |
|
Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 |
Thanks, but yes, it's always (very thoroughly) locked.
|
||
5th Jan 2016 3:03pm |
|
Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 |
Just to update this, I told my dealer about it during the van's second service last Friday. They had a look and reckon it's due to some damage to one of the propshafts which is missing a grease nipple and had worn.
I'm puzzled about this as they were supposed to have sorted the grease nipple last year and I can't see how the problem would be caused by a duff UJ, but I'll let them do whatever it is and see if it helps. I'll update this again after the work is completed (mid April). |
||
13th Mar 2016 8:03am |
|
dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
sounds like they are making it up as they go
|
||
13th Mar 2016 8:44am |
|
Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 |
Dredging up my old topic (please read the first post), this happened to the van again today, same shop chain, different branch! I love Aldi, too.
I reversed into a parking space on my left, drove out half an hour later to the right, and diff lock had magically engaged itself. I had to drive for about a mile before I could find somewhere to stop to fiddle about with it and eventually managed to get it to disengage. The lever was in the high range position over to the right, and I've not touched it for months. I think I'm going to ring Land Rover up tomorrow and see what they say, as Sturgess's have been unable to get it to happen when they've had it to look at. Has anyone else had the same problem? |
||
8th Sep 2016 6:22pm |
|
hornet Member Since: 04 Jan 2010 Location: Western Europe Posts: 361 |
As I can see from the workshop-manual (section 308-07B), the linkage to transfer-box and switch for difflock can/has to be adjusted (as Steve already mentioned). There exists a special tool (308-711 LOCKING TOOL HIGH/LOW SELECTOR) as well. If I were you, I would make the dealer to start with that instead reducing the problem to a missing nipple (!). (That has to be fixed as well of course).
|
||
9th Sep 2016 7:00am |
|
Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 |
Thanks very much Hornet.
As far as I know, they've done the nipple.... |
||
9th Sep 2016 7:57am |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17382 |
I don't believe that a damaged propshaft could be causing your transfer box autonomously to engage the difflock, there is simply no logical connection.
A poorly adjusted linkage, or a failed or sticking detent on the difflock selector, or a combination of both, would be my initial suspicion. |
||
9th Sep 2016 10:24am |
|
Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 |
I completely agree. I think the dealer was just clutching at straws as they couldn't get the blessed thing to do it while it was with them.
I'm not going to manage to call them today now, but I'll do so next week and keep this updated as and when. Thanks very much for the help folks. |
||
9th Sep 2016 10:36am |
|
Jukathy Member Since: 25 Jan 2015 Location: Berlin Posts: 170 |
Storytellers report from wireless cash systems interacting with the Puma 10AS i.e. the transmitter plip does not work near restaurants, ice cream shops where such a system is installed.
If there was a way to access the ECU such wieless systems could possibly influence the diff lock light on the dash. Although hardly probable. But wireless systems cannot physically interact with the diff lock , from my point of view at least. Therefore I'd say: don't leave your children and pets playing inside your Land Rover while you're shopping |
||
10th Sep 2016 8:24pm |
|
hornet Member Since: 04 Jan 2010 Location: Western Europe Posts: 361 |
Off topic:
So would you like to express that driving the PUMA with AS10 is helpful when you pass throug a diet or is it the opposite? |
||
13th Sep 2016 5:23am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis