↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Top Up Front Swivel Housings
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
rob369



Member Since: 05 Feb 2014
Location: eastbourne
Posts: 17
United Kingdom 2013 Defender 90 Puma 2.2 HT Aintree Green
Top Up Front Swivel Housings
Hi defender, owners this is my first entry. I have a 2008 hard top and want to top up front swivel housings with the landrover grease pack I have bought as one looks a bit dryer than the other at the top. I could do with a few pointers as I don't want to mess up! I dont know if its grease or oil in it can you mix them? Also there does not seem to be a level plug although I have heard of people using a cable tie as dipstick how much about half full? Also to get the stuff in do you need to put on full lock? Any tips would be greatly appreciated. Rob369. (I just want to get out there and drive it)!
Post #305277 5th Feb 2014 12:13pm
View user's profile Send private message View poster's gallery Reply with quote
MK



Member Since: 28 Aug 2008
Location: Santiago
Posts: 2415
Chile 2007 Defender 110 Puma 2.4 SW Chawton White
If swivels are not leaking then the oil seal between them and the diff is gone. In such case your diff oil should look darker than GL-5 oil. The one-shot grease is NGLI00, i.e. lower viscosity than normal chassis grease (NGLI2). Anyway it should be about 1/3 full. Puma 110" SW

.............................................................
Earth first. Other planets later
Post #305284 5th Feb 2014 12:41pm
View user's profile Send private message View poster's gallery Reply with quote
rob369



Member Since: 05 Feb 2014
Location: eastbourne
Posts: 17
United Kingdom 2013 Defender 90 Puma 2.2 HT Aintree Green
Thank for the input MK, your defender looks great in white. rob369
Post #305285 5th Feb 2014 12:49pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5700
2006 Defender 110 Td5 USW Zermatt Silver
I soak the sachet of grease in very hot water, before you use it, it makes it much easier to do Thumbs Up

Andy
Post #305382 5th Feb 2014 7:30pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums